Zoneding Mining
全站搜索
Search the entire website
整站搜索产品中心新闻中心
点击开始搜索
热门搜索
UltraForm-MXFlexiPoly-RNanoForm Z300EcoFab P200
Search the entire website
From gold to tungsten, our Jigging Separator Machine handle it all – versatile solutions for every mining need
A jigging machine is a piece of equipment that implements the jigging process. The process in which the material is sorted according to density differences, mainly in a vertically rising and falling stream of variable speed media. The difference in size and shape of the material has an effect on the result of the separation. The medium used in jigging can be either water or air. When water is used as the sorting medium, it is called hydraulic jigging; when air is used as the sorting medium, it is called wind jigging.
According to the different equipment structure and water flow movement, it can be roughly divided into the following categories: piston jigger, diaphragm jigger, air pulsation jigger, and dynamic screen jigger.
Selection Guide
Jig machine selection steps: first and jig machine manufacturer telephone contact, by asking some technical questions, you can roughly understand whether this manufacturer is professional, the next step is to carry out beneficiation tests, this step is critical, you bring ore to the jig machine manufacturer, the general situation is 30-40 kg of raw ore, the regular manufacturers have small jig machine available for free test, the test is not as good as the actual production indicators, but also The test is not as good as the actual production indicators, but also from the side to grasp the ore beneficiation indicators, and jigger manufacturer’s technology is perfect, if the test link can reach the ideal indicators, then this manufacturer has a certain strength, and then is to order equipment links, look at the quality of jigger equipment, external viewing jigger working principle is reasonable, and according to your site conditions for improvement, of course, the important issue is the price, the price is also based on the above The price is also based on the above cases of negotiation, the final order products, jigger manufacturers have professional technical staff to install and commission until you produce qualified products.
Jig concentrator is a gravity separator machine used to separate coarse grain ore in alluvial gold, crushed rock gold, coltan, tin, tungsten, diamond, barite, iron, manganese, fluorite, garnet, etc
Raw ore is sent into the jigging chamber, due to the drumming effect of the diaphragm, the mineral grains in the media are stratified according to the specific gravity, fine and heavy mineral grains through the artificial bed particles of the gap and sieve holes, deposited in the jigging hopper of the hopper storage hopper, the upper layer of coarse and light mineral grains (materials) by the media flow rushed to the sieve at the end of the discharge port, due to the after jigging chamber than the former jigging chamber location is lower than the 50mm, so the light mineral grains through the front chamber tailboard overflow into the back room, and again subject to jigging, after which the different minerals are separated. After that, the minerals with different specific gravity will be separated and the sorting operation will be completed.
Adopting conical slide valve, the failure rate is reduced by 80%, energy consumption is small, it can realize the sorting needs of different materials and increase the processing capacity by more than 35%.
1. Energy saving, high efficiency, environmental protection.
2. Wide range of particle size, 0-30mm particle size minerals can be classified into the selection.
3. The base is made of channel steel, and the collective is made of welded steel plate with good quality and high abrasion resistance.
4. The classifier adopts tile lining, with very low maintenance rate and higher durability of wearing parts.
| Model | Jig Area (M2) | Stroke (R/Min) | Feeding size (mm) | Hutch Water ( T/H) | Pressure Water (kg/cm2) | Capacity;(T/H) | Power;(KW) | Overall dimensions (mm) | Weight (T) |
| JT0.57-1 | 0.57 | 60-160 | <6 | 1-2 | ≥0.3 | 1-2.5 | 1.5 | 1560x820x1550 | 0.612 |
| JT1-1 | 1.04 | 60-160 | <10 | 2-3 | ≥0.3 | 4-10 | 2.2 | 1322x1190x1915 | 0.9 |
| JT2-2 | 2.28 | 60-160 | <10 | 2-4 | ≥0.3 | 8-15 | 3 | 3225x1550x2150 | 1.637 |
| JT4-2 | 4 | 50-125 | <10 | 4-8 | ≥0.1 | 8-16 | 7.5 | 4240x1990x2750 | 4.6 |
| JT4-2A | 4 | 50-125 | <10 | 4-8 | ≥0.1 | 8-16 | 8 | 4240x1990x2750 | 4.6 |
| JT5-2 | 4.86 | 80-120 | <10 | 4-10 | ≥0.1 | 10-20 | 7.5 | 3940x2006x2580 | 4.6 |
A Jigging Separator Machine uses pulsating water currents to separate particles based on their density, concentrating heavier minerals or materials.
The machine stratifies materials by repeatedly pulsing water through a bed, causing denser particles to settle and lighter ones to move upwards for separation.
Jigging Separator Machines offer efficient density-based separation, low operating costs, and are suitable for processing a wide range of particle sizes.
These machines are commonly used in mineral processing for coal washing, ore beneficiation (gold, tin, iron), and aggregate cleaning applications.
Jigging Separator Machines effectively separate coal, gold, tin, iron ore, gravel, and other materials with significant density differences.
